Automotive parts hot press tank is a high-temperature and high-pressure equipment used for manufacturing automotive parts. It can heat the raw material to a certain temperature and maintain it at this temperature for a period of time to obtain the desired shape and performance.
Auto parts autoclave
Introduction to auto parts autoclave:
Automotive parts hot press tank is a high-temperature and high-pressure equipment used for manufacturing automotive parts. It can heat the raw material to a certain temperature and maintain it at this temperature for a period of time to obtain the desired shape and performance. Hot press cans are widely used in fields such as automotive manufacturing, aerospace, electronics, and healthcare. In automobile manufacturing, hot press cans are used to manufacture important components such as car bodies, frames, and wheels. These components typically need to withstand high temperatures and pressures, so they require the use of hot press cans for manufacturing. The main advantage of a hot press can is that it can provide a high-temperature and high-pressure environment, thereby obtaining high-quality components. In addition, the hot press can also control the shape and performance of components by changing temperature and pressure to meet different needs.
Auto parts autoclave model parameters:
ltem | Parameter |
Working diameter（mm） | 800-6000 |
Working length（mm） | 1000-30000 |
Working pressure（MPa） | 0.3-3 |
Operating Temperature（℃） | 100-300 |
Temperature control accuracy（℃） | ±0.5-±3.0 |
Uniformity inside the tank（℃） | 1.0-3.0 |
Pressure control accuracy（MPa） | ±0.01 |
Opening method（KPa） | ≤2 |
Heating method | Eelectric heating |
Application fields of auto parts autoclave:
Automotive parts hot press cans are widely used in carbon fiber automotive modification parts with dry carbon technology, such as engine hood, interior and exterior parts.
Composition of Auto parts autoclave System:
1. Tank body: A high-pressure and high-temperature resistant tank body is formed by the tank body, tank door mechanism, high-temperature motor, air duct, insulation layer, etc;
2. Door opening method: 1. Manual quick opening (manual rotation, manual opening) 2. Electric door opening (electric rotation, manual opening) 3. Hydraulic door opening (hydraulic rotation, hydraulic opening);
3. Sealing device: The tank door adopts a silicone inflatable seal, which can withstand high temperatures of 400 ° C;
4. Safety system: including tank door interlocking device, tank top safety valve, and over temperature and over pressure alarm system;
5. Pressure system: The pressure transmission and control system consists of an air compressor, an air storage tank, a pressure control valve, pipelines, pressure transmitters, and pressure gauges;
6. Heating system: composed of stainless steel electric heating tubes, high-temperature fans, air duct plates, insulation layers, and temperature control systems. The heating power meets the high temperature requirements and heating rate requirements of the chamber;
7. Cooling system: stainless steel cooling pipes, water tanks, water pumps, cooling towers, pipelines, valves, set up for product and tank cooling;
8. Temperature cycling system: composed of a circulating fan, air guide plate, and guide cover, it accelerates heat transfer and circulation, forming a uniform temperature field;
9. Vacuum system: composed of vacuum pump, vacuum tank, pipeline, vacuum gauge, and vacuum valve, providing vacuum conditions for encapsulated composite prefabricated parts;
10. Automatic control system: including a complete set of electrical cabinets, using Siemens PLC control system to achieve full control and real-time recording of process parameters such as pressure, temperature, and cooling.